test  
Sale!

16″ .223 Wylde Complete Upper, Premium – **DEMO**

$699.95 $429.95

Out of stock - Join the waitlist to be emailed when this product becomes available

Description

*There may be slight scuff marks on the hand guard. They in no way affect quality or function. Built for a demo with approx 20 rounds fired.

**Are demos were all built with top name products to showcase them to local customers. All demos are completely function tested, test fired and headspaced to ensure performance. Satisfaction guaranteed.

With the options included, this is an absolute steal at this price.

Only one available.

All uppers are assembled using correct methods, torque values and assembly grease. Completely function Tested and test fired for guaranteed flawless performance.

UPPER RECEIVER

  • Forged Milspec
  • M4 Feedramps
  • .250 takedown pin holes
  • Engraved T-marks
  • Includes port door and forward assist
  • 7075-T6 Forged Aluminum
  • Anodized Black

HAND GUARD

  • Integrity SFF Rail
  • Free Floating Design
  • 15″ (18oz w/Steel Barrel Nut)
  • Type 3 Hard Coat Anodized, Black
  • Inner Diameter 1.36″
  • Outer Diameter (smooth section where hand rests) 1.5″
  • Outer Diameter at Picattiny Rails 2.0″
  • No Special Tools Needed (wrench flats on barrel nut)
  • Extremely Comfortable design
  • Front/Rear QD Mount Points (3 & 9 o’clock)
  • QD Slots have Zero Stops Machined In (won’t twist)
  • Shims Included For Proper Indexing
  • Barrel Nut Included
  • Free Floating Design
  • Made In U.S.A.

BOLT CARRIER GROUP

  • Integrity Premium Melonite
  • M16 profile 5.56/223/300BLK
  • Melonite/Nitrided throughout assembly, including carrier and key
  • Carrier is Case Hardene 8620
  • Bolt is Case Hardened 9310 (7% stonger than C158)
  • “True” Mil-Spec Dimension Bolt. External Surfaces Are CNC Ground After Heat Treat For Precision Fit
  • Magnetic Particle Tested/Marked
  • High Pressure Tested (Batch)
  • Shot Peened to Stress Relieve/Increase Tensile Strength
  • Extractor is 4340 Tool Steel w/ Crane (NAVSPECWAR) O-Ring & Spring
  • Gas Key is 4130 Steel Attached w/Grade 8 Fasteners Properly Staked Into Milled “Valley” To Ensure Proper Positioning
  • Cam Pin Is Hardened 4340 Steel
  • Firing Pin is Mil Spec 8740 Steel, Center-Less Ground and Hard Chrome Coated
  • All Parts Are 100% Made in the USA

BARREL

  • 16″ Integrity *Premium*
  • SOCOM/Medium Contour
  • Mid Length Gas
  • 2lb 2oz
  • Mil-Spec (B-11595E) 4150 Steel
  • Melonite (QPQ) Treated
  • Wylde Chamber (.223 or 5.56)
  • M4/Extended Feed Ramps
  • .750 Gas Block Area
  • .80″ Under the Handguards
  • 1/2×28 Thread Pitch
  • Fully Stress Relieved
  • Air Gauged
  • Magnetic Particle Inspected
  • 1-8 Twist Rate
  • 5R Right Hand Rifling

MUZZLE DEVICE

  • Tac Grip Compensator
  • Reduces muzzle climb and recoil by 40% allowing the shooter to stay on target at rapid fire or full auto fire
  • Less muzzle climb and recoil than a standard A2 flash hider
  • Machined out of 10-45 stainless steel, it comes with a Black Oxide
  • 5.56 model with 1/2 x 28 tpi

CHARGING HANDLE

  • CNC Billet Machined
  • Made to Mil Spec Dimensions
  • Hard Coat Anodized
  • Made in U.S.A.

Reviews

There are no reviews yet.

Be the first to review “16″ .223 Wylde Complete Upper, Premium – **DEMO**”

Your email address will not be published. Required fields are marked *